The 5" /6" Monitors designed and tested veteran audio engineers to meet your needs in a studio monitoring environment. It is focused on the functional goal of delivering pure, original sound without any additional coloration.The 5"/6"power monitor is self-powered, directly accepting a line-level signal from a variety of sources. 5" /6" Monitors is designed to overcome all limitations of conventional studio reference monitors within the digital audio environment. This system delivers a wide-range frequency response by employing two extraordinary driivers and unique crossoverr technologycology licensed by AnAn Audio..It boaststsa stable and balanced low-mid frequency response along with a defined mid and high frequency response as well. Both drivers are magnetically shielded for desktop music production. For pro engineers at commercial studios to home studio owners, the 5" /6" Monitor sets new affordable standard in studio monitoring.
Product Specification M5: Type: 5inch Studio monitors speaker Frequency response: 56 Hz - 22 kHz Frequency range: 47 -38 Hz kHz Amplifier, RMS: if 40W high frequency 30 W Signal to noise ratio: > 100 dB typical weighted Cross frequency: 2.8 kHz High frequency drivers: 1.25 inches (25 mm) magnetic shielding natural silk dome input connector: 1 x XLR balanced input connector / 1 x TRS balanced unbalanced input connector if the driver: 5 inch (127 mm) and high temperature voicecoil Kevlar curved cone damping rubber surround. Magnetic shielding Polarity: positive signal input + outward from low-frequency cone displacement Input impedance: 20 ohm K balance, 10 K imbalance Indicator: power on / off rear panel indicator Power requirements: Factory-programmed 50/60Hz 115V to 240V Cabinet: Vinyl-laminated high-acoustic-efficiency MDF Dimensions (W x D xH):175 mm x 200 mm x 338 mm. Net Weight (not included packaging):6.0 kg
Product Specification M6: Type: 6inch Studio monitors speaker Frequency response: 45 Hz - 22 kHz Frequency range: 45 -35 Hz kHz Amplifier, RMS: if 70 w high frequency 60 W Signal to noise ratio: > 100 dB typical weighted Crossover frequency: 2.5 kHz High frequency driver: 1 inch (32 mm) magnetically shielded natural silk dome Input connector: 1 x XLR balanced input connector / 1 x TRS balanced unbalanced input connector if the driver: 6 inches (153 mm) Kevlar curved cone and high-temperature voice rings, a damping rubber surround. Magnetic shielding. Polarity: out of the positive signal + input to produce low frequency cone displacement Input impedance: 20 K balance, 10 K imbalance Indicator: power on / off rear panel indicator Power requirements: Factory-programmed 50/60Hz 115V to 240V Cabinet: high-acoustic-efficiency MDF Vinyl-laminated Dimension: (W x D xH):220 mm x 260mm x 370 mm Net Weight (not included packaging):8.5 kg
|